K-WTDB-60
Hydraulic fail safe caliper disc brake
Spring applied – Hydraulically released
The Kateel range of hydraulic brakes use a specially formulated hydraulic oil (Hydrol 68) to deliver the desired hydraulic pressure. These hydraulic brakes require a hydraulic power unit to operate the brake. Variable braking torque can be achieved by regulating the hydraulic pressure as shown in the chart.
A hydraulic unit and an electrical controller system will give full control over the braking operation thus enabling smooth stopping of the machine. Over speed setting can also be programmed .The scoop switch option indicates the condition of the brake (On / Off).
Features :
Automatic wear compensation
Easy pad replacement
Wide torque range
Large pad area
Easy mounting
Options :
Scoop switch
Organic/Sintered metal brake pad
Hydraulic power unit
Specifications :
Max Braking force : 12,478 N
Min braking force : 10,481 N
Maximum clamping force : 31,196 N
Minimum clamping force : 26,202 N
Operating pressure normal/max : 105 / 125 bar
Air / oil consumption : 120cc
Pad width : 110mm
Pad area : 52,500 sqmm
Maximum allowable wear of brake pad : 5mm
Nominal Co-efficient of friction : ~ 0.35-0.4 µ
Max Air gap : 1.5mm per side
Weight : 85kgs